cryogenic elastomeric foam rubber thermal insulation sheet roll

Kingflex Cryogenic products are designed to meet the demands of low-temperature environments. And it is can reduce the risk of corrosion under insulation, and mimimise the time needed for installation. It is suitable for temperatures to -183 °C. It is designed to meet the demands of low-temperature environments and is suitable for use in the oil and gas industry. This insulation solution provides exceptional thermal performance, reduces the risk of corrosion under insulation (CUI) and minimises the time needed for installation.
send email to us

Products Details

King flex flexible ultra-low temperature insulation system belongs to the multi-layer composite structure, is the most economical and reliable cooling system. The system can be directly installed under the temperature as low as -110°C on all piping equipment when the surface temperature of the pipe is lower than -100 °C and the pipeline usually has obvious repeated movement or vibration.

ULT Sheet standard size

Code

Thickness(mm)

Length(m)

M2/Bag

KF-ULT-25

25

8

8
* Low thermal conductivity *Suitable for applications from -200 °C to +110 °C *Low density and weight *Cost effective *Fewer seams to provide a faster and more secure installation *Easily applied to awkward and difficult shapes *Easily handled and transported *Free of fibre and dust. *Suitable for the oil and gas industry *Minimised risk of corrosion under insulation *Multi‐layered system provides exceptional thermal performance *Ease of installation with reduced use of hazardous components

Performance

Base Material

Standard

Kingflex ULT

Kingflex LT

Themal Conductivity

(-100℃,  0.028                                          -165℃, 0.021)

 (0℃,0.033,                                                          -50 ℃, 0.028)

ASTM    C177                                     EN   12667

Density

60-80 kg/m3

40-60 kg/m3

ASTM  D 1622

Recommend Operating Temperature

(-200℃   +125℃)

(-50℃   +105℃)

NA

Percentage of Close Area

> 95%

>95%

ASTM  D 2856

Moisture Permeance Factor

NA

< 1.96 × 10g (m.s.Pa)

ASTM  E96

Wet Resistance Factor  µ

NA

>10000

EN  12086                                             EN  13469

 Water Vapor Permeability Coefficient

NA

0.0039g/h.m2  (25mm thickness)

ASTM   E96

PH

≥ 8.0

≥ 8.0

ASTM C871

Tensile Strength  MPa

 -100℃,  0.30                                        -165℃,  0.25

0℃,  0.15                                                       -40℃,  0.218

ASTM  D 1623

Compressive Strength  MPa

(-100℃, ≤0.37)

(-40℃ ,≤0.16)

ASTM   D 1621
Tianjin Petrobest Energy Equipment Co., Ltd. Mat Project Of Shandong Jin Ming Coal Water Chemical Group Co.,Ltd. Glycol Project Of Lihuayi Group Co., Ltd. Lng Natural Gas Station Of Enn Energy Holdings Limited. Qingdao Sinopec Lng Project Of Shanxi Xiangkuang Group Co., Ltd. Integrated Eqipment System Of Air China Ningxia Baofeng Energy Co.,Ltd. Shanxi Yangquan Coal Industry(Group)Co.,Ltd Shanxi Jin Ming Methanol Project

Previous:Elastomeric cryogenic insulation for low temperature application

Next:Central AC Ducting Nitrile rubber foam insulation sheet

Low Thermal Conductivity, Rubber Insulation Tube, Building Material, Heat Pipe Insulation, Insulation for low temperatures, Pipe Insulation Lagging Tape, Clad Pipe Insulation, Ruber Foam, Air Vent Insulation, Isolation For Pipe Line Systems,

Featured Products

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours